LARGE CALIBER HOLLOW WALL TWINE PIPE PRODUCTION LINE
Use:
1, infrared drying crystal research and development is
Desiccant-technology products, the crystallization of a complete
drying, crystal dry short time, low energy consumption, high
effectiveness. And dehumidifier can reduce the rapid changes in the
molecular structure of raw materials, raw materials to maintain
properties.
2, drying of raw materials: PET, PLA, PC, and so on. New materials,
recycling materials.
3, Crystal dry principle: The drying of plastic raw materials
imported short-wave infrared radiation directly to the special
properties of raw materials, raw materials from within the start
warming up, rapid heating water immediately after gasification, raw
materials from within the aspiration to transfer to the outside
after discharge. In a short period of time to dry crystallization
of the raw materials required for best results.
4, the most to preform sheet, plate, drawing the former dry
desiccant
Performance:
1, the original source of great power (to produce PET-400) Kg / h
power consumption of about 82 km / h)
2, Crystal for about two hours, dehumidifier for about 4-5 hours.
3, after the moisture content of products desiccant 90-130 ppm.
4, after the crystallization of mixing the powder.
5, the replacement of raw materials, clean-up difficulties,
clean-up time is approximately 2-3 hours.
6, covering the installation of equipment, accessories and more
installation of the large amount of desiccant to be changed
regularly, heaters, filters, and so on.
7, different raw materials design different.
